S-DCR HEADSET
S-DCR model is an Integrated headset compatible with DCR system (Deda internal cable routing) that allows the direct cable routing into the topcover. This solution makes any Deda stems fitting a DCR frame, a quick and smart solution for most of bicycle brands. It allows the full integration of the cables ,like the DCR headset, but leaving a portion of the cables visible under the stem. The system works with a standard tapered fork steerer (1-1/8” - 1.5”) and requires a 52mm (1.5”) upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork. The S-DCR headset is also compatible with Deda HSS spacers for a better integration.
Headset model:
Integrated 1.5” - 1.5”
Bearings type:
Angular contact bearing; chrome steel
Bearings size:
Upper 51,9 × 40 × 8 mm
Lower 51,9 × 40 × 8 mm
Contact angle:
45 - 45
Headtube diameter:
56.0 mm
Fork steerer:
Tapered 1 1/8” (28.6 mm) - 1.5” (38.10 mm)
Top cover:
56 mm
Crown race diameter:
39.8 mm aluminum
Stack height:
16.2 mm
Weight:
90 g
SKU:
HDS-DCRX
Note:
Compatible with 4 cables routing; DEDA HSS spacers are recommended for S-DCR headset.